| View previous topic :: View next topic |
| Author |
Message |
egro
badatel
Joined: 04 Mar 2004
Posts: 127
Location: Piestany,Slovakia
261.00 SMM
|
 Posted: Sat Apr 09, 2005 7:32 pm Post subject: Problem z MC60 |
 |
|
Cauko,
mam dost velky proble.
Vcera som si prerobil datovy kabel na servisny. Vsetko vpohode ficalo, patchoval som... Ale odrazu som asi nieco zle potvrdil(pri patchovani a zapisalo to asi nieco kam nemalo), potom som zistil, ze to bol patch na fw13(ja viem som blby). A odvtedy sa mi nespoji VKlay s mobilom. Mam patchnuty bootcore. Ale mobil mi normalne funguje len spojit nejde. Aj kabel funguje. Mam MC60 fw10
1.Ked dam Siemens MC60 (Bootcore Bug) napise:
A hardware I/O error was reported while acessing COM1-Loader: Opem: No answer from boot GoBoot_BootcoreBug.bin.
2.Ked dam Siemens MC60 (Patched Bootcore) napise:
A hardware I/O error was reported while acessing COM1-Loader: Opem: No answer from boot Nutzo.bin.
PROSIM PORADTE.
_________________
Ericsson A2628 -> Siemens C25 -> Siemens C45 -> Siemend MC60 fw.10 3,5MB + patche -> Siemens CXT65 (fw.16>50) 30 servisnych + kopec grafickych patchov 
DCA 510 (prerobeny z DCA500)
Eurotel SK>T-Mobile SK |
|
| Back to top |
|
 |
corfen
pisatel
Joined: 23 Sep 2004
Posts: 298
Location: Praha--> vysehraaad :)
661.00 SMM
|
| Posted: Sat Apr 09, 2005 8:03 pm Post subject: |
|
|
zkus tohle: http://www.siemensmania.cz/content.php?id=105 (čti až to uplně na konci toho článku- to je pro MC60)
Tohle by ti mělo na 70% pomoc oživit foun pro pc , když se ti to spoji s tím programem tak máš skoro vyhráno... pak už jen stačí do mobilu nahrat tu fubu co tam je (fubu přez ten M55Siemenstool) viz ten članek.... no a potom všem co je v tom článku akorat fubu ve Vklay a je to.... 
_________________
MC60 FW10 - 3,5MB + spousta patchu 
-->MC60 FW13 - 3,5MB + ještě víc vlastních patchu
http://mc60.fansiemens.com/
siemens is the BEST... |
|
| Back to top |
|
|
egro
badatel
Joined: 04 Mar 2004
Posts: 127
Location: Piestany,Slovakia
261.00 SMM
|
| Posted: Sat Apr 09, 2005 8:06 pm Post subject: |
|
|
a mozem pouzit aj zalohu z vklaya?
_________________
Ericsson A2628 -> Siemens C25 -> Siemens C45 -> Siemend MC60 fw.10 3,5MB + patche -> Siemens CXT65 (fw.16>50) 30 servisnych + kopec grafickych patchov
DCA 510 (prerobeny z DCA500)
Eurotel SK>T-Mobile SK |
|
| Back to top |
|
|
corfen
pisatel
Joined: 23 Sep 2004
Posts: 298
Location: Praha--> vysehraaad :)
661.00 SMM
|
| Posted: Sat Apr 09, 2005 8:08 pm Post subject: |
|
|
| egro wrote: | | a mozem pouzit aj zalohu z vklaya? |
NE! fubu ve Vklay má myslím jinak offsety. musiš tu fubu co je v tom článku... ta je přímo pro M55siemens tool...
_________________
MC60 FW10 - 3,5MB + spousta patchu
-->MC60 FW13 - 3,5MB + ještě víc vlastních patchu
http://mc60.fansiemens.com/
siemens is the BEST... |
|
| Back to top |
|
|
egro
badatel
Joined: 04 Mar 2004
Posts: 127
Location: Piestany,Slovakia
261.00 SMM
|
| Posted: Sat Apr 09, 2005 8:12 pm Post subject: |
|
|
a neodpalim ho tym upne?
_________________
Ericsson A2628 -> Siemens C25 -> Siemens C45 -> Siemend MC60 fw.10 3,5MB + patche -> Siemens CXT65 (fw.16>50) 30 servisnych + kopec grafickych patchov
DCA 510 (prerobeny z DCA500)
Eurotel SK>T-Mobile SK |
|
| Back to top |
|
|
egro
badatel
Joined: 04 Mar 2004
Posts: 127
Location: Piestany,Slovakia
261.00 SMM
|
| Posted: Sat Apr 09, 2005 8:24 pm Post subject: |
|
|
Freia:
FREIA - Engine build 9, Frontend build 3
Thanks goes out for the following:
Maxim, Rolis, Sergey, PapaJoe, Lead,
TheWizard, Jozso (for hardware and cable
support and of course beta testing),
Nico, Victor, Pinker, Tom,
and all the others who supports ...
MISC_calibrate_delay : 209.30 BogoMIPS
COMM_LoadBoots : selected phone family is 10
TTY_OpenCOMPort : opening COM1
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_SendBoot : boot file is not accepted
M55Siemenstool :Boothing Phone ... Transmision Erorr
_________________
Ericsson A2628 -> Siemens C25 -> Siemens C45 -> Siemend MC60 fw.10 3,5MB + patche -> Siemens CXT65 (fw.16>50) 30 servisnych + kopec grafickych patchov
DCA 510 (prerobeny z DCA500)
Eurotel SK>T-Mobile SK |
|
| Back to top |
|
|
corfen
pisatel
Joined: 23 Sep 2004
Posts: 298
Location: Praha--> vysehraaad :)
661.00 SMM
|
| Posted: Sat Apr 09, 2005 10:56 pm Post subject: |
|
|
| egro wrote: | Freia:
FREIA - Engine build 9, Frontend build 3
Thanks goes out for the following:
Maxim, Rolis, Sergey, PapaJoe, Lead,
TheWizard, Jozso (for hardware and cable
support and of course beta testing),
Nico, Victor, Pinker, Tom,
and all the others who supports ...
MISC_calibrate_delay : 209.30 BogoMIPS
COMM_LoadBoots : selected phone family is 10
TTY_OpenCOMPort : opening COM1
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_SendBoot : boot file is not accepted
M55Siemenstool :Boothing Phone ... Transmision Erorr |
no tak mas asi uplne v hajzlu botcore.... tedka jestli chces patchovat tak ti zbejva uz jen TESTPOINT. ale newim přesně... radši si počkej jestli ti někdo ještě nepomuže...
_________________
MC60 FW10 - 3,5MB + spousta patchu
-->MC60 FW13 - 3,5MB + ještě víc vlastních patchu
http://mc60.fansiemens.com/
siemens is the BEST... |
|
| Back to top |
|
|
Borix
veterán
Joined: 10 Jul 2004
Posts: 1861
10861.00 SMM
|
| Posted: Sun Apr 10, 2005 8:03 am Post subject: |
|
|
Ak som čítal správne tak ešte môže skésiť znova patchnúť bootcore cez to px5amd, veď phone môže zapnúť a mohlo by to pomôcť.
_________________
 |
|
| Back to top |
|
|
egro
badatel
Joined: 04 Mar 2004
Posts: 127
Location: Piestany,Slovakia
261.00 SMM
|
| Posted: Sun Apr 10, 2005 8:10 am Post subject: |
|
|
Lenze tam mi napise (cez java aplikaciu px5amd verzia 0.3.2):
BOOTCORE ALREADY PATCHED
1 BACKUP BOOTCORE
0 EXIT
Mozno keby sa to dalo nejako oklamat a patchnut ho znova alebo obnovit zo zalohy lebu tu som si urobil.
_________________
Ericsson A2628 -> Siemens C25 -> Siemens C45 -> Siemend MC60 fw.10 3,5MB + patche -> Siemens CXT65 (fw.16>50) 30 servisnych + kopec grafickych patchov
DCA 510 (prerobeny z DCA500)
Eurotel SK>T-Mobile SK |
|
| Back to top |
|
|
Borix
veterán
Joined: 10 Jul 2004
Posts: 1861
10861.00 SMM
|
| Posted: Sun Apr 10, 2005 8:20 am Post subject: |
|
|
| egro wrote: | Lenze tam mi napise (cez java aplikaciu px5amd verzia 0.3.2):
BOOTCORE ALREADY PATCHED
1 BACKUP BOOTCORE
0 EXIT
Mozno keby sa to dalo nejako oklamat a patchnut ho znova alebo obnovit zo zalohy lebu tu som si urobil. |
Tak skús dať backup bootcore, vypnúť phone, zapnúť phone spustiť dať patch bootcore a znova vypnúť a zapnúť a potom spustiť, mylo by ti napísať bootcore already ptched a potom už len vypnúť a skúsiť ako to ide s V-klayom či freiou.
_________________
|
|
| Back to top |
|
|
egro
badatel
Joined: 04 Mar 2004
Posts: 127
Location: Piestany,Slovakia
261.00 SMM
|
| Posted: Sun Apr 10, 2005 8:20 am Post subject: |
|
|
A nepomohlo by keby som tam znovu dal cez siemensacky update fw10? Ak by sa s nim vobec spojil.
_________________
Ericsson A2628 -> Siemens C25 -> Siemens C45 -> Siemend MC60 fw.10 3,5MB + patche -> Siemens CXT65 (fw.16>50) 30 servisnych + kopec grafickych patchov
DCA 510 (prerobeny z DCA500)
Eurotel SK>T-Mobile SK |
|
| Back to top |
|
|
Borix
veterán
Joined: 10 Jul 2004
Posts: 1861
10861.00 SMM
|
| Posted: Sun Apr 10, 2005 8:24 am Post subject: |
|
|
| egro wrote: | | A nepomohlo by keby som tam znovu dal cez siemensacky update fw10? Ak by sa s nim vobec spojil. |
Sk=usiť môžeš aj to, ale myslím, že to na bootcore nemá vpyv. A neviem vôbec či je možné aby si cez Siemens update mohol prehrávať na ten istý fw, zdá sa mi, že môžeš len na vyšší, tak potom skús ešte winswup update, prípadne originál update na vyšši fw.
_________________
|
|
| Back to top |
|
|
egro
badatel
Joined: 04 Mar 2004
Posts: 127
Location: Piestany,Slovakia
261.00 SMM
|
| Posted: Sun Apr 10, 2005 8:31 am Post subject: |
|
|
Som sa cez tu java aplikaciu po stlaceni mriezky dostal do nejakeho
EXPERT MOD-u
1.BACKUP BOOTCORE
3.CUSTOM PATCH
4.DUMP MEMORY
0.EXIT
A prave ta 2.-ka tam chyba kde by bolo patchnutie bootcore...
_________________
Ericsson A2628 -> Siemens C25 -> Siemens C45 -> Siemend MC60 fw.10 3,5MB + patche -> Siemens CXT65 (fw.16>50) 30 servisnych + kopec grafickych patchov
DCA 510 (prerobeny z DCA500)
Eurotel SK>T-Mobile SK |
|
| Back to top |
|
|
egro
badatel
Joined: 04 Mar 2004
Posts: 127
Location: Piestany,Slovakia
261.00 SMM
|
| Posted: Sun Apr 10, 2005 8:32 am Post subject: |
|
|
Neviete nahodou co, co znamena?
_________________
Ericsson A2628 -> Siemens C25 -> Siemens C45 -> Siemend MC60 fw.10 3,5MB + patche -> Siemens CXT65 (fw.16>50) 30 servisnych + kopec grafickych patchov
DCA 510 (prerobeny z DCA500)
Eurotel SK>T-Mobile SK |
|
| Back to top |
|
|
egro
badatel
Joined: 04 Mar 2004
Posts: 127
Location: Piestany,Slovakia
261.00 SMM
|
| Posted: Sun Apr 10, 2005 8:51 am Post subject: |
|
|
Nechapem to, ze mobil ide uplne vpohode, len spojit sa nechce.
_________________
Ericsson A2628 -> Siemens C25 -> Siemens C45 -> Siemend MC60 fw.10 3,5MB + patche -> Siemens CXT65 (fw.16>50) 30 servisnych + kopec grafickych patchov
DCA 510 (prerobeny z DCA500)
Eurotel SK>T-Mobile SK |
|
| Back to top |
|
|
|
Fórum
FAQ
Search
Memberlist
Skupiny uživatelů
Profile
Log in to check your private messages
Bank
Lottery
User Shops
Shops
