i need help,I want cx70 sw56 lg8

[mykong]

i from china,my cx70 is big problem。

Subject: “Switch Off” with C65,C70,CX70 Infineon Chipsets

Dear all,
in a some cases the above mentioned mobile phones manufactured before date code T7 and
assembled with Infineon Chipsets
show automatic “Switch Off” problems.


Attention: The majority of C65, C70, CX70 are not affected, due to usage of “Hitachi Chipsets”.

Explanation: There are 2 failure causes.
- A software caused problem ( Exit Code 004)

- A hardware cause problem ( Exit Code 008)

( timing of the 26MHz oscillator)


Solution:

Check the exit code (use X-Focus)

- For the SW-Problem, a software update > SW 54 solves the problem
- For the 26 MHz oscillator timing, resistor R4019 has to be replaced versus a new one.

Part-Number: L50652-C391-J2
Value 390 Ohm


so i want cx70 sw56 lg8 patch

lg8 (800=x8yy) - English2, Malaysian, Russian, Simplified Chinese, Traditional Chinese

[palucko]

i from china,my cx70 is big problem。 I z Číny, můj cx70 je velký problém.

Subject: “Switch Off” with C65,C70,CX70 Infineon Chipsets Subject: "Vypnout" s C65, C70, CX70 Infineon chipsety

Dear all, Vážení všichni,
in a some cases the above mentioned mobile phones manufactured before date code T7 and v některých případech výše zmíněné mobilní telefony vyrobené před datem kód a T7
assembled with Infineon Chipsets Infineon montovány s chipsety
show automatic “Switch Off” problems. show automatické "Vypnout" problémy.


Attention: The majority of C65, C70, CX70 are not affected, due to usage of “Hitachi Chipsets”. Pozor: většina C65, C70, CX70, nejsou ovlivněny, a to z důvodu používání "Hitachi čipových sad."

Explanation: There are 2 failure causes. Vysvětlení: Existují 2 příčiny neúspěchu.
- A software caused problem ( Exit Code 004) - A software způsobil problém (Exit kód 004)

- A hardware cause problem ( Exit Code 008) - A hardware způsobit problém (Exit kód 008)

( timing of the 26MHz oscillator) (Načasování z 26MHz oscilátor)


Solution: Řešení:

Check the exit code (use X-Focus) Zkontrolujte návratového kódu (použití X-Focus)

- For the SW-Problem, a software update > SW 54 solves the problem - Pro SW-Problem, aktualizace softwaru> SW 54 řeší problém
- For the 26 MHz oscillator timing, resistor R4019 has to be replaced versus a new one. - Pro 26 MHz oscilátor časování, to rezistor R4019 má být nahrazen versus nový.

Part-Number: L50652-C391-J2 Část-Number: L50652-C391-J2
Value 390 Ohm Hodnota 390 Ohm


so i want cx70 sw56 lg8 patch tak chci cx70 sw56 lg8 patch

lg8 (800=x8yy) - English2, Malaysian, Russian, Simplified Chinese, Traditional Chinese lg8 (800 = x8yy) - English2, malajské, ruština, zjednodušená čínština, tradiční čínština



langpacks http://www.siemensmania.cz/content.php?id=920&p=2
Firmwares http://www.siemensmania.cz/firmware.php only lg4
how change LGpack http://translate.google.com/translate?hl=cs&ie=UTF-8&u=http%3A%2F%2Fwww.siemensmania.cz%2Fcontent.php%3Fid%3D986&sl=cs&tl=en&history_state0= translated from CZ to EN

FF is FullFlash , is all of the memory of phone ,.., FF ju can create with program V-Klay

[drp]

líp tos nemohl prelozit ne dpbre ale nechapu to